Table of Contents
NetBSD uses the X Window System (from X.Org) to provide a graphical interface.
Please note that the X Window System is a rather bare bones framework. It acts as a base for modern desktop environments like GNOME or KDE, but they are not part of the X Window System. NetBSD ships with the X Window System, but it does not include these desktop environments; they must be added via pkgsrc.
When you start using X you'll find many new terms which you may find confusing at first. The basic elements are:
Video hardware, i.e., your video card.
An X server running on top of the hardware. The X server provides a standard way to display graphics (including fonts for text display) and get mouse/keyboard/other input.
X clients. These are the programs you directly interact with. They run on top of the X server. A web browser like Firefox is an example of an X client. X is network-transparent, which means that you can run X clients on one machine, and the X server (i.e., the display, with video hardware) on another machine.
A window manager running on top of the X server. The window manager is a special X client that is allowed to control the placement of windows. It can also “decorate” windows with standard “widgets” (usually these provide actions like window motion, resizing, iconifying, window killing, etc.).
A desktop environment such as GNOME or KDE. These are suites of integrated software designed to give you a well-defined range of software and a more or less common interface to each program. These typically include a window manager, file manager, web browser, email client, multimedia player, text editor, address book, help browser, etc. As you may have guessed, a desktop environment is not needed to use X, but many users will want to install one.
In most cases, you will be able to start using X without any
configuration at all, and startx will work just
fine. In rare cases, however, configuration of the X
server is required. This configuration file is located at
/etc/X11/xorg.conf. The structure of the
configuration file is described formally in xorg.conf(5).
To generate an initial configuration file for your X server, run the command
This command should create a configuration file and place it in your home directory. To test the generated configuration file, run, e.g.,
X -config ~/xorg.conf.new
If this succeeds, you should see a crosshatched background and a cursor in the shape of an X. Try moving the cursor around to verify that the mouse is functional. You can then switch to another virtual terminal (Ctrl-Alt-F#) or log in remotely and kill the X process.
If the above test was successful, move the file into place
/etc/X11/xorg.conf and you are ready to go.
PS/2 and USB mice will normally be autodetected, and a configuration entry like the following will be generated:
Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "wsmouse" Option "Device" "/dev/wsmouse" Option "ZAxisMapping" "4 5 6 7" EndSection
Even if you have already configured your keyboard for wscons (See Section 8.1, “wscons”), you need to configure it for X as well, at least if you want to use a non-US layout.
An easy solution is to use the XKB protocol to specify the keyboard type and layout.
Here is an example that shows how to use a German keyboard with the position of the Ctrl and Caps Lock keys swapped as an additional option:
Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbOptions" "ctrl:nocaps" EndSection
To find out the keyboard models, layouts and variants supported on your
If you wish to change the repeat rate of your keyboard, you can set it with the “AutoRepeat” option, which takes two arguments: delay and rate, respectively. The following example sets the initial delay to 200 milliseconds and the repeat rate to 30 per second:
Option "AutoRepeat" "200 30"
If X is already running, the keyboard repeat rate can be changed with the xset(1) command:
xset r 200 30
You can also run this command in your
file. See below (Section 9.8, “Customizing X”) for more
If X does not run at the resolution you think it should, first run xrandr and see if the resolution you want is listed. If your preferred resolution is listed in that command's output, you can change resolutions with, e.g.,
xrandr -s 1680x1050
Normally, your video card will be automatically detected. In the
event that this autodetection fails, all available drivers can be found
/usr/X11R7/lib/modules/drivers. The driver can
be set with the “Driver” directive in the
“Device” section, as shown below.
Section "Device" Identifier "Card0" Driver "intel" EndSection
You can start X with the following command:
If your basic X server configuration is correct, you are left in the X environment with the default window manager (twm). If you want a more advanced window manager or desktop environment, many are available in pkgsrc. See Section 9.9, “Other window managers or desktop environments” for information about adding and changing window managers.
One of the first things you will want to do is to change the
programs that run when X is first started. The easiest way to do this
is to copy the default
.xinitrc file to your home
directory and modify it, or create a simple new one from scratch.
cp /etc/X11/xinit/xinitrc ~/.xinitrc
The following example shows how to start the window manager
(twm) and open an instance of the
xclock and xterm programs.
The screen background color is set to “bisque4”, which is
... # start some programs xclock -geometry 50x50-1-1 & xsetroot -solid bisque4 & xterm -geometry 80x34-1+1 -bg OldLace & exec twm # no '&' here
With this type of setup, to quit X you must exit the window manager, which is usually done by selecting "exit" from its menu.
The above example is very simple, but illustrates the basics
of controlling the clients that are run when X is started. You can
run any number of commands from your
including basic X configuration commands like
xset b off to turn off the bell.
If you don't like twm, which is a very
simple window manager, you can install another window manager or
a desktop environment from pkgsrc.
The following example uses the Openbox window manager, but there are
many others available in
Openbox can be installed via binary packages or compiled with pkgsrc. As always, assuming a properly set PKG_PATH, the binary package method is:
pkg_add -v openbox
To build it with pkgsrc, run:
Openbox is now installed; to start it you must modify your
substitute the line which calls
a line which calls
# start some useful programs xclock -geometry 50x50-1-1 & # start window manager: exec openbox # no '&' here
The startx command will start the X11 session
with Openbox. As configured in the example
file above, choosing “Log Out” from Openbox's
menu will end the X11 session.
Installing a desktop environment is almost as easy. The following example shows how to use the Xfce desktop environment.
pkg_add -v xfce4
cp /usr/pkg/share/examples/rc.d/famd /etc/rc.d
cp /usr/pkg/share/examples/rc.d/dbus /etc/rc.d
cp /usr/pkg/share/examples/rc.d/hal /etc/rc.d
echo rpcbind=YES >> /etc/rc.conf
echo famd=YES >> /etc/rc.conf
echo dbus=YES >> /etc/rc.conf
echo hal=YES >> /etc/rc.conf
After running the above commands, edit your
.xinitrc as above and change
“openbox” (or “twm”) to
“xfce4-session”. The next time you run
startx the Xfce desktop environment will be
If you always use X and the first thing you do after you log in is run startx, you can set up a graphical login to do this automatically. It is very easy:
.xsession file in your home
directory. This file is similar to
and can, in fact, be a link to it.
ln -s .xinitrc ~/.xsession
/etc/rc.conf, adding the following
xdm=YES # x11 display manager
Start xdm (or reboot your system, as this will be done automatically from now on):
The configuration files for xdm
are in the
Xservers file specifies the
virtual console that X is started on. It defaults to
“vt05”, which is the console you reach via
“Ctrl+Alt+F5”. If you want to use a different virtual
console, change vt05 as desired. In order to avoid keyboard contention
between getty and xdm, be sure to start xdm on a virtual terminal
where getty is disabled. For example, if in
Xservers you have:
:0 local /usr/X11R7/bin/X :0 vt04
/etc/ttys you should have
ttyE3 "/usr/libexec/getty Pc" wsvt25 off secure
(Please note that vt04 corresponds to ttyE3; In
/etc/X11/xdm/Xservers, numbering starts at 1,
/etc/ttys, numbering starts at 0).
If you want to change the look of your xdm login screen, you can
modify the xdm configuration file.
For example, to change the background color you can add the
following line to the
xsetroot -solid SeaGreen